Convert Cubic meters per hour to Cubic feet per second
Instantly convert Cubic meters per hour (m³/hr) to Cubic feet per second (ft³/s) with our free online calculator.
Formula: m³/hr to ft³/s — multiply by 0.00980965
Reference Table
| Cubic meters per hour (m³/hr) | Cubic feet per second (ft³/s) |
|---|---|
| 1 | 0.00980965 |
| 5 | 0.0490482 |
| 10 | 0.0980965 |
| 25 | 0.245241 |
| 50 | 0.490482 |
| 100 | 0.980965 |
How to Convert Cubic meters per hour to Cubic feet per second
Formula
To convert Cubic meters per hour (m³/hr) to Cubic feet per second (ft³/s): multiply by 0.00980965
Step-by-Step
- Start with your value in Cubic meters per hour (m³/hr).
- Multiply by 0.00980965 to perform the conversion.
- The result is your value expressed in Cubic feet per second (ft³/s).
Conversion Factor
1 m³/hr = 0.00980965 ft³/s
Reverse Factor
1 ft³/s = 101.94 m³/hr
Worked Example
Convert 25 Cubic meters per hour to Cubic feet per second: 25 m³/hr = 0.245241 ft³/s
About Cubic meter per hour (m³/hr)
A metric flow-rate unit equal to exactly 1/3,600 m³/s. m³/hr is the de-facto standard unit for industrial process flows in metric countries, HVAC air handling (DIN EN 16798 / ASHRAE 62.1 ventilation calcs), pump sizing in European pump curves (KSB, Grundfos, Wilo specifications), natural-gas metering and the gas grid balance reports (TSO data is in Mm³/hr), municipal water-treatment plant capacity, and biogas/anaerobic-digester output. European building-code minimum air-exchange rates (e.g., German DIN 1946 fresh-air requirements per occupant) and Eurovent-certified fan-coil ratings are almost always expressed in m³/hr. Practical reference: a typical residential heat-recovery ventilation unit moves 100-400 m³/hr; an industrial centrifugal pump might be rated at 50-5,000 m³/hr. Convert to GPM by multiplying by 4.403, to CFM by multiplying by 0.5886, to L/s by dividing by 3.6.
About Cubic foot per second (ft³/s)
An imperial flow-rate unit used predominantly in US hydrology, river-discharge measurement, water-resource engineering, and large-scale waterworks design. Also called "cfs" or the colloquial "cusec" in US water-resources jargon. The US Geological Survey (USGS) StreamStats and the National Water Information System publish all US river streamgage data in cfs — a federal reporting standard since the 1950s. US Army Corps of Engineers flood-routing analyses, FEMA flood-insurance studies, and state water-rights records (especially in the western US under prior-appropriation doctrine) all measure discharge in cfs. Reference values: a small headwater stream might flow 5-20 cfs at base flow and 200-500 cfs during a 100-year storm; the Colorado River below Glen Canyon Dam is typically 8,000-25,000 cfs; the lower Mississippi runs 350,000-600,000 cfs depending on the season. 1 ft³/s = 7.4805 US gallons per second = 449 GPM = 28.32 L/s = 0.02832 m³/s.
Quick Facts
- 1 Cubic meter per hour equals 0.00980965 Cubic feet per second
- 1 Cubic foot per second equals 101.94 Cubic meters per hour
- Cubic meter per hour is a unit of volumetric flow rate
- Cubic foot per second is a unit of volumetric flow rate
- This conversion is commonly used in plumbing, HVAC systems, and chemical process engineering
- The Cubic meter per hour belongs to the metric system
- The Cubic foot per second belongs to the imperial system
Common Cubic meter per hour to Cubic foot per second Conversions
| Cubic meters per hour (m³/hr) | Cubic feet per second (ft³/s) |
|---|---|
| 0.01 | 0.0000980965 |
| 0.1 | 0.000980965 |
| 0.25 | 0.00245241 |
| 0.5 | 0.00490482 |
| 1 | 0.00980965 |
| 2 | 0.0196193 |
| 3 | 0.0294289 |
| 5 | 0.0490482 |
| 10 | 0.0980965 |
| 15 | 0.147145 |
| 20 | 0.196193 |
| 25 | 0.245241 |
| 50 | 0.490482 |
| 75 | 0.735723 |
| 100 | 0.980965 |
| 250 | 2.45241 |
| 500 | 4.90482 |
| 1000 | 9.80965 |
| 5000 | 49.0482 |
| 10000 | 98.0965 |
Understanding Cubic meters per hour
The Cubic meter per hour (symbol: m³/hr) is a unit of volumetric flow rate. A metric flow-rate unit equal to exactly 1/3,600 m³/s. m³/hr is the de-facto standard unit for industrial process flows in metric countries, HVAC air handling (DIN EN 16798 / ASHRAE 62.1 ventilation calcs), pump sizing in European pump curves (KSB, Grundfos, Wilo specifications), natural-gas metering and the gas grid balance reports (TSO data is in Mm³/hr), municipal water-treatment plant capacity, and biogas/anaerobic-digester output. European building-code minimum air-exchange rates (e.g., German DIN 1946 fresh-air requirements per occupant) and Eurovent-certified fan-coil ratings are almost always expressed in m³/hr. Practical reference: a typical residential heat-recovery ventilation unit moves 100-400 m³/hr; an industrial centrifugal pump might be rated at 50-5,000 m³/hr. Convert to GPM by multiplying by 4.403, to CFM by multiplying by 0.5886, to L/s by dividing by 3.6.
It belongs to the metric measurement system.
Cubic meters per hour are commonly used in plumbing, HVAC systems, and chemical process engineering.
Understanding Cubic feet per second
The Cubic foot per second (symbol: ft³/s) is a unit of volumetric flow rate. An imperial flow-rate unit used predominantly in US hydrology, river-discharge measurement, water-resource engineering, and large-scale waterworks design. Also called "cfs" or the colloquial "cusec" in US water-resources jargon. The US Geological Survey (USGS) StreamStats and the National Water Information System publish all US river streamgage data in cfs — a federal reporting standard since the 1950s. US Army Corps of Engineers flood-routing analyses, FEMA flood-insurance studies, and state water-rights records (especially in the western US under prior-appropriation doctrine) all measure discharge in cfs. Reference values: a small headwater stream might flow 5-20 cfs at base flow and 200-500 cfs during a 100-year storm; the Colorado River below Glen Canyon Dam is typically 8,000-25,000 cfs; the lower Mississippi runs 350,000-600,000 cfs depending on the season. 1 ft³/s = 7.4805 US gallons per second = 449 GPM = 28.32 L/s = 0.02832 m³/s.
It belongs to the imperial measurement system.
Cubic feet per second are commonly used in plumbing, HVAC systems, and chemical process engineering.
Why Convert Cubic meters per hour to Cubic feet per second?
Converting between Cubic meters per hour and Cubic feet per second is a frequent requirement for engineers, scientists, and students working with volumetric flow rate values. Different industries and regions favour different unit systems, so having a dependable conversion tool saves time and prevents errors in technical calculations. Whether you are verifying a specification sheet, cross-checking simulation results, or preparing a report for an international audience, accurate volumetric flow rate conversion is essential.
Frequently Asked Questions
How do I convert Cubic meters per hour to Cubic feet per second?
A metric flow-rate unit equal to exactly 1/3,600 m³/s. To convert Cubic meters per hour to Cubic feet per second, multiply by 0.00980965. For example, 25 m³/hr equals 0.245241 ft³/s.
How many Cubic feet per second are in 1 Cubic meter per hour?
There are 0.00980965 Cubic feet per second in 1 Cubic meter per hour.
How many Cubic meters per hour are in 1 Cubic foot per second?
There are 101.94 Cubic meters per hour in 1 Cubic foot per second.
What is the formula for Cubic meter per hour to Cubic foot per second conversion?
The formula is: multiply by 0.00980965. This means 1 m³/hr = 0.00980965 ft³/s.
Is a Cubic meter per hour bigger than a Cubic foot per second?
Yes. One Cubic meter per hour is larger than one Cubic foot per second because 1 m³/hr equals 0.00980965 ft³/s, which is less than 1.
When do you need to convert between Cubic meters per hour and Cubic feet per second?
An imperial flow-rate unit used predominantly in US hydrology, river-discharge measurement, water-resource engineering, and large-scale waterworks design. Cubic meter per hour and Cubic foot per second are both volumetric flow units, so conversion comes up whenever one source of information uses one unit and another uses the other — a classic cross-reference challenge in engineering, trade, travel, and everyday life.