Convert Liters per minute to Cubic meters per hour
Instantly convert Liters per minute (L/min) to Cubic meters per hour (m³/hr) with our free online calculator.
Formula: L/min to m³/hr — multiply by 0.06
Reference Table
| Liters per minute (L/min) | Cubic meters per hour (m³/hr) |
|---|---|
| 1 | 0.06 |
| 5 | 0.3 |
| 10 | 0.6 |
| 25 | 1.5 |
| 50 | 3 |
| 100 | 6 |
How to Convert Liters per minute to Cubic meters per hour
Formula
To convert Liters per minute (L/min) to Cubic meters per hour (m³/hr): multiply by 0.06
Step-by-Step
- Start with your value in Liters per minute (L/min).
- Multiply by 0.06 to perform the conversion.
- The result is your value expressed in Cubic meters per hour (m³/hr).
Conversion Factor
1 L/min = 0.06 m³/hr
Reverse Factor
1 m³/hr = 16.6667 L/min
Worked Example
Convert 25 Liters per minute to Cubic meters per hour: 25 L/min = 1.5 m³/hr
About Liter per minute (L/min)
A metric flow-rate unit equal to 1/60,000 m³/s. L/min is the most commonly-stated metric flow unit in everyday consumer and medical contexts: household appliances and showerheads (a low-flow showerhead is 8-12 L/min vs. the older 20+ L/min designs per the EU EcoLabel showerhead criteria), garden hoses (10-30 L/min depending on supply pressure and hose diameter), medical equipment per ISO 13485 (IV-infusion pumps at fractional L/min, mechanical-ventilator tidal-volume reporting derived from L/min minute volume), oxygen-therapy nasal cannula (1-5 L/min low-flow, up to 60 L/min on high-flow nasal cannula HFNC therapy per Fisher & Paykel Airvo standards), beer-line and beverage-dispense flow controllers, dental-suction equipment, and small-flow industrial dosing pumps for chemical injection. The American Society of Anesthesiologists and the WHO oxygen-supply guidelines both quote oxygen delivery in L/min. 1 L/min = 0.2642 US GPM = 0.06 m³/hr = 16.667 mL/s.
About Cubic meter per hour (m³/hr)
A metric flow-rate unit equal to exactly 1/3,600 m³/s. m³/hr is the de-facto standard unit for industrial process flows in metric countries, HVAC air handling (DIN EN 16798 / ASHRAE 62.1 ventilation calcs), pump sizing in European pump curves (KSB, Grundfos, Wilo specifications), natural-gas metering and the gas grid balance reports (TSO data is in Mm³/hr), municipal water-treatment plant capacity, and biogas/anaerobic-digester output. European building-code minimum air-exchange rates (e.g., German DIN 1946 fresh-air requirements per occupant) and Eurovent-certified fan-coil ratings are almost always expressed in m³/hr. Practical reference: a typical residential heat-recovery ventilation unit moves 100-400 m³/hr; an industrial centrifugal pump might be rated at 50-5,000 m³/hr. Convert to GPM by multiplying by 4.403, to CFM by multiplying by 0.5886, to L/s by dividing by 3.6.
Quick Facts
- 1 Liter per minute equals 0.06 Cubic meters per hour
- 1 Cubic meter per hour equals 16.6667 Liters per minute
- Liter per minute is a unit of volumetric flow rate
- Cubic meter per hour is a unit of volumetric flow rate
- This conversion is commonly used in plumbing, HVAC systems, and chemical process engineering
- The Liter per minute belongs to the metric system
Common Liter per minute to Cubic meter per hour Conversions
| Liters per minute (L/min) | Cubic meters per hour (m³/hr) |
|---|---|
| 0.01 | 0.0006 |
| 0.1 | 0.006 |
| 0.25 | 0.015 |
| 0.5 | 0.03 |
| 1 | 0.06 |
| 2 | 0.12 |
| 3 | 0.18 |
| 5 | 0.3 |
| 10 | 0.6 |
| 15 | 0.9 |
| 20 | 1.2 |
| 25 | 1.5 |
| 50 | 3 |
| 75 | 4.5 |
| 100 | 6 |
| 250 | 15 |
| 500 | 30 |
| 1000 | 60 |
| 5000 | 300 |
| 10000 | 600 |
Understanding Liters per minute
The Liter per minute (symbol: L/min) is a unit of volumetric flow rate. A metric flow-rate unit equal to 1/60,000 m³/s. L/min is the most commonly-stated metric flow unit in everyday consumer and medical contexts: household appliances and showerheads (a low-flow showerhead is 8-12 L/min vs. the older 20+ L/min designs per the EU EcoLabel showerhead criteria), garden hoses (10-30 L/min depending on supply pressure and hose diameter), medical equipment per ISO 13485 (IV-infusion pumps at fractional L/min, mechanical-ventilator tidal-volume reporting derived from L/min minute volume), oxygen-therapy nasal cannula (1-5 L/min low-flow, up to 60 L/min on high-flow nasal cannula HFNC therapy per Fisher & Paykel Airvo standards), beer-line and beverage-dispense flow controllers, dental-suction equipment, and small-flow industrial dosing pumps for chemical injection. The American Society of Anesthesiologists and the WHO oxygen-supply guidelines both quote oxygen delivery in L/min. 1 L/min = 0.2642 US GPM = 0.06 m³/hr = 16.667 mL/s.
It belongs to the metric measurement system.
Liters per minute are commonly used in plumbing, HVAC systems, and chemical process engineering.
Understanding Cubic meters per hour
The Cubic meter per hour (symbol: m³/hr) is a unit of volumetric flow rate. A metric flow-rate unit equal to exactly 1/3,600 m³/s. m³/hr is the de-facto standard unit for industrial process flows in metric countries, HVAC air handling (DIN EN 16798 / ASHRAE 62.1 ventilation calcs), pump sizing in European pump curves (KSB, Grundfos, Wilo specifications), natural-gas metering and the gas grid balance reports (TSO data is in Mm³/hr), municipal water-treatment plant capacity, and biogas/anaerobic-digester output. European building-code minimum air-exchange rates (e.g., German DIN 1946 fresh-air requirements per occupant) and Eurovent-certified fan-coil ratings are almost always expressed in m³/hr. Practical reference: a typical residential heat-recovery ventilation unit moves 100-400 m³/hr; an industrial centrifugal pump might be rated at 50-5,000 m³/hr. Convert to GPM by multiplying by 4.403, to CFM by multiplying by 0.5886, to L/s by dividing by 3.6.
It belongs to the metric measurement system.
Cubic meters per hour are commonly used in plumbing, HVAC systems, and chemical process engineering.
Why Convert Liters per minute to Cubic meters per hour?
Converting between Liters per minute and Cubic meters per hour is a frequent requirement for engineers, scientists, and students working with volumetric flow rate values. Different industries and regions favour different unit systems, so having a dependable conversion tool saves time and prevents errors in technical calculations. Whether you are verifying a specification sheet, cross-checking simulation results, or preparing a report for an international audience, accurate volumetric flow rate conversion is essential.
Frequently Asked Questions
How do I convert Liters per minute to Cubic meters per hour?
A metric flow-rate unit equal to 1/60,000 m³/s. To convert Liters per minute to Cubic meters per hour, multiply by 0.06. For example, 25 L/min equals 1.5 m³/hr.
How many Cubic meters per hour are in 1 Liter per minute?
There are 0.06 Cubic meters per hour in 1 Liter per minute.
How many Liters per minute are in 1 Cubic meter per hour?
There are 16.6667 Liters per minute in 1 Cubic meter per hour.
What is the formula for Liter per minute to Cubic meter per hour conversion?
The formula is: multiply by 0.06. This means 1 L/min = 0.06 m³/hr.
Is a Liter per minute bigger than a Cubic meter per hour?
Yes. One Liter per minute is larger than one Cubic meter per hour because 1 L/min equals 0.06 m³/hr, which is less than 1.
When do you need to convert between Liters per minute and Cubic meters per hour?
A metric flow-rate unit equal to exactly 1/3,600 m³/s. Liter per minute and Cubic meter per hour are both volumetric flow units, so conversion comes up whenever one source of information uses one unit and another uses the other — a classic cross-reference challenge in engineering, trade, travel, and everyday life.