Convert Square inches per second to Stokes
Instantly convert Square inches per second (in²/s) to Stokes (St) with our free online calculator.
Formula: in²/s to St — multiply by 6.4516
Reference Table
| Square inches per second (in²/s) | Stokes (St) |
|---|---|
| 1 | 6.4516 |
| 5 | 32.258 |
| 10 | 64.516 |
| 25 | 161.29 |
| 50 | 322.58 |
| 100 | 645.16 |
How to Convert Square inches per second to Stokes
Formula
To convert Square inches per second (in²/s) to Stokes (St): multiply by 6.4516
Step-by-Step
- Start with your value in Square inches per second (in²/s).
- Multiply by 6.4516 to perform the conversion.
- The result is your value expressed in Stokes (St).
Conversion Factor
1 in²/s = 6.4516 St
Reverse Factor
1 St = 0.155 in²/s
Worked Example
Convert 25 Square inches per second to Stokes: 25 in²/s = 161.29 St
About Square inch per second (in²/s)
An imperial kinematic-viscosity unit equal to ≈ 6.4516 × 10⁻⁴ m²/s = 645.16 cSt (= 1/144 of ft²/s, since 1 ft² = 144 in²) per NIST SP 811. in²/s is a specialty unit used in some US mechanical-engineering contexts where ft²/s would be inconveniently large and cSt is the industry standard. Common in: older US hydraulic-fluid specifications (MIL-PRF-83282 fire-resistant hydraulic fluid, MIL-PRF-87257 low-temperature hydraulic fluid, and other US military-spec hydraulic fluid TSDs sometimes dual-list viscosity in cSt and in²/s); US aerospace bearing lubricant specifications (Pratt & Whitney and GE Aviation engine-oil specs); and pre-1990s US-edition machine-design textbooks where bearing-design problems were worked entirely in in / lbf / s. Most modern US engineering has converged on cSt and mPa·s. Convert in²/s to cSt by multiplying by 645.16; to m²/s by multiplying by 6.452 × 10⁻⁴.
About Stoke (St)
The CGS unit of kinematic viscosity equal to exactly 1 cm²/s (= 100 cSt = 10⁻⁴ m²/s). Named after Irish mathematician Sir George Gabriel Stokes, whose 1851 paper 'On the Effect of the Internal Friction of Fluids on the Motion of Pendulums' (Cambridge Phil. Trans.) established the laminar-drag formula F = 6πμrv (Stokes' law) — still the basis for terminal-velocity calculations for sedimenting particles, atmospheric aerosol settling rates, and laboratory particle-sizing techniques (Stokes diameter). The stoke as a unit is occasionally used directly for highly viscous fluids in geophysics and glass science where typical values are large enough that cSt would have many leading zeros: basaltic lava 10² to 10⁴ St at eruption temperature, granitic / rhyolitic lava 10⁹ to 10¹¹ St, the asthenosphere of Earth's mantle 10¹⁸ to 10²⁰ St, the lower mantle 10²² St, glass at the working point ~10⁴ St.
Quick Facts
- 1 Square inch per second equals 6.4516 Stokes
- 1 Stoke equals 0.155 Square inches per second
- Square inch per second is a unit of kinematic viscosity
- Stoke is a unit of kinematic viscosity
- This conversion is commonly used in fluid flow analysis, lubrication engineering, and process design
- The Square inch per second belongs to the imperial system
- The Stoke belongs to the metric system
Common Square inch per second to Stoke Conversions
| Square inches per second (in²/s) | Stokes (St) |
|---|---|
| 0.01 | 0.064516 |
| 0.1 | 0.64516 |
| 0.25 | 1.6129 |
| 0.5 | 3.2258 |
| 1 | 6.4516 |
| 2 | 12.9032 |
| 3 | 19.3548 |
| 5 | 32.258 |
| 10 | 64.516 |
| 15 | 96.774 |
| 20 | 129.032 |
| 25 | 161.29 |
| 50 | 322.58 |
| 75 | 483.87 |
| 100 | 645.16 |
| 250 | 1612.9 |
| 500 | 3225.8 |
| 1000 | 6451.6 |
| 5000 | 32258 |
| 10000 | 64516 |
Understanding Square inches per second
The Square inch per second (symbol: in²/s) is a unit of kinematic viscosity. An imperial kinematic-viscosity unit equal to ≈ 6.4516 × 10⁻⁴ m²/s = 645.16 cSt (= 1/144 of ft²/s, since 1 ft² = 144 in²) per NIST SP 811. in²/s is a specialty unit used in some US mechanical-engineering contexts where ft²/s would be inconveniently large and cSt is the industry standard. Common in: older US hydraulic-fluid specifications (MIL-PRF-83282 fire-resistant hydraulic fluid, MIL-PRF-87257 low-temperature hydraulic fluid, and other US military-spec hydraulic fluid TSDs sometimes dual-list viscosity in cSt and in²/s); US aerospace bearing lubricant specifications (Pratt & Whitney and GE Aviation engine-oil specs); and pre-1990s US-edition machine-design textbooks where bearing-design problems were worked entirely in in / lbf / s. Most modern US engineering has converged on cSt and mPa·s. Convert in²/s to cSt by multiplying by 645.16; to m²/s by multiplying by 6.452 × 10⁻⁴.
It belongs to the imperial measurement system.
Square inches per second are commonly used in fluid flow analysis, lubrication engineering, and process design.
Understanding Stokes
The Stoke (symbol: St) is a unit of kinematic viscosity. The CGS unit of kinematic viscosity equal to exactly 1 cm²/s (= 100 cSt = 10⁻⁴ m²/s). Named after Irish mathematician Sir George Gabriel Stokes, whose 1851 paper 'On the Effect of the Internal Friction of Fluids on the Motion of Pendulums' (Cambridge Phil. Trans.) established the laminar-drag formula F = 6πμrv (Stokes' law) — still the basis for terminal-velocity calculations for sedimenting particles, atmospheric aerosol settling rates, and laboratory particle-sizing techniques (Stokes diameter). The stoke as a unit is occasionally used directly for highly viscous fluids in geophysics and glass science where typical values are large enough that cSt would have many leading zeros: basaltic lava 10² to 10⁴ St at eruption temperature, granitic / rhyolitic lava 10⁹ to 10¹¹ St, the asthenosphere of Earth's mantle 10¹⁸ to 10²⁰ St, the lower mantle 10²² St, glass at the working point ~10⁴ St.
It belongs to the metric measurement system.
Stokes are commonly used in fluid flow analysis, lubrication engineering, and process design.
Why Convert Square inches per second to Stokes?
Converting between Square inches per second and Stokes is a frequent requirement for engineers, scientists, and students working with kinematic viscosity values. Different industries and regions favour different unit systems, so having a dependable conversion tool saves time and prevents errors in technical calculations. Whether you are verifying a specification sheet, cross-checking simulation results, or preparing a report for an international audience, accurate kinematic viscosity conversion is essential.
Frequently Asked Questions
How do I convert Square inches per second to Stokes?
An imperial kinematic-viscosity unit equal to ≈ 6. To convert Square inches per second to Stokes, multiply by 6.4516. For example, 25 in²/s equals 161.29 St.
How many Stokes are in 1 Square inch per second?
There are 6.4516 Stokes in 1 Square inch per second.
How many Square inches per second are in 1 Stoke?
There are 0.155 Square inches per second in 1 Stoke.
What is the formula for Square inch per second to Stoke conversion?
The formula is: multiply by 6.4516. This means 1 in²/s = 6.4516 St.
Is a Square inch per second bigger than a Stoke?
No. One Square inch per second is smaller than one Stoke because 1 in²/s equals 6.4516 St, which is greater than 1.
When do you need to convert between Square inches per second and Stokes?
The CGS unit of kinematic viscosity equal to exactly 1 cm²/s (= 100 cSt = 10⁻⁴ m²/s). Square inch per second and Stoke are both kinematic viscosity units, so conversion comes up whenever one source of information uses one unit and another uses the other — a classic cross-reference challenge in engineering, trade, travel, and everyday life.