Convert Revolutions per minute to Degrees per second
Instantly convert Revolutions per minute (RPM) to Degrees per second (deg/s) with our free online calculator.
Formula: RPM to deg/s — multiply by 6
Reference Table
| Revolutions per minute (RPM) | Degrees per second (deg/s) |
|---|---|
| 1 | 6 |
| 5 | 30 |
| 10 | 60 |
| 25 | 150 |
| 50 | 300 |
| 100 | 600 |
How to Convert Revolutions per minute to Degrees per second
Formula
To convert Revolutions per minute (RPM) to Degrees per second (deg/s): multiply by 6
Step-by-Step
- Start with your value in Revolutions per minute (RPM).
- Multiply by 6 to perform the conversion.
- The result is your value expressed in Degrees per second (deg/s).
Conversion Factor
1 RPM = 6 deg/s
Reverse Factor
1 deg/s = 0.166667 RPM
Worked Example
Convert 25 Revolutions per minute to Degrees per second: 25 RPM = 150 deg/s
About Revolutions per minute (RPM)
A rotational-speed unit counting complete 360° turns per minute (1 RPM = 2π/60 rad/s ≈ 0.1047 rad/s = 6°/s). RPM is the dominant everyday rotational-speed unit on tachometers, motor nameplates, and machinery specifications. Reference values: automotive engine idle 700-900 RPM, redline 6,000-9,000 RPM for naturally-aspirated gasoline cars (Honda S2000 F20C 9,000 RPM, Lexus LFA 1LR-GUE 9,500 RPM, F1 V10 engines pre-2014 18,000-20,000 RPM); turbomachinery (steam turbines 3,000 RPM for 50 Hz grid-synchronous / 3,600 RPM for 60 Hz grid; modern aeroderivative gas-turbine 3,600-9,500 RPM depending on shaft); machine tools (typical CNC milling spindle 8,000-24,000 RPM, high-speed machining 30,000-60,000 RPM); hard-disk-drive spindles 5,400 / 7,200 / 10,000 / 15,000 RPM (the last in enterprise SAS drives); ceiling fans 200-300 RPM; washing-machine spin cycles 800-1,600 RPM. Converting RPM to rad/s (multiply by π/30 ≈ 0.1047) is routine for rotor-dynamic analysis and FEA.
About Degree per second (deg/s)
Angular velocity expressed in degrees rotated per second (1 deg/s = π/180 rad/s ≈ 0.01745 rad/s = 1/6 RPM). Deg/s is the standard reporting unit in aviation and aerospace for rotational rates: aircraft yaw / pitch / roll body-rate gyros per ARINC 429 inertial-reference unit data buses, missile guidance systems (typical airframe-rate limits 100-400 deg/s for fighter aircraft, up to 1,000 deg/s for short-range AAMs), satellite attitude-control system (ACS) reaction-wheel and CMG rates per AIAA standards, and the default unit on consumer-grade IMU (inertial measurement unit) datasheets and drone flight controllers (InvenSense MPU-6050, Bosch BMI160, ST LSM6DSL series). A standard 3-axis MEMS gyroscope chip typically measures up to ±2,000 deg/s full-scale (FSR) with programmable lower-range settings of ±250 / ±500 / ±1,000 deg/s for better noise floor at slower rates.
Quick Facts
- 1 Revolutions per minute equals 6 Degrees per second
- 1 Degree per second equals 0.166667 Revolutions per minute
- Revolutions per minute is a unit of angular velocity
- Degree per second is a unit of angular velocity
- This conversion is commonly used in motor specifications, rotating machinery, and mechanical design
Common Revolutions per minute to Degree per second Conversions
| Revolutions per minute (RPM) | Degrees per second (deg/s) |
|---|---|
| 0.01 | 0.06 |
| 0.1 | 0.6 |
| 0.25 | 1.5 |
| 0.5 | 3 |
| 1 | 6 |
| 2 | 12 |
| 3 | 18 |
| 5 | 30 |
| 10 | 60 |
| 15 | 90 |
| 20 | 120 |
| 25 | 150 |
| 50 | 300 |
| 75 | 450 |
| 100 | 600 |
| 250 | 1500 |
| 500 | 3000 |
| 1000 | 6000 |
| 5000 | 30000 |
| 10000 | 60000 |
Understanding Revolutions per minute
The Revolutions per minute (symbol: RPM) is a unit of angular velocity. A rotational-speed unit counting complete 360° turns per minute (1 RPM = 2π/60 rad/s ≈ 0.1047 rad/s = 6°/s). RPM is the dominant everyday rotational-speed unit on tachometers, motor nameplates, and machinery specifications. Reference values: automotive engine idle 700-900 RPM, redline 6,000-9,000 RPM for naturally-aspirated gasoline cars (Honda S2000 F20C 9,000 RPM, Lexus LFA 1LR-GUE 9,500 RPM, F1 V10 engines pre-2014 18,000-20,000 RPM); turbomachinery (steam turbines 3,000 RPM for 50 Hz grid-synchronous / 3,600 RPM for 60 Hz grid; modern aeroderivative gas-turbine 3,600-9,500 RPM depending on shaft); machine tools (typical CNC milling spindle 8,000-24,000 RPM, high-speed machining 30,000-60,000 RPM); hard-disk-drive spindles 5,400 / 7,200 / 10,000 / 15,000 RPM (the last in enterprise SAS drives); ceiling fans 200-300 RPM; washing-machine spin cycles 800-1,600 RPM. Converting RPM to rad/s (multiply by π/30 ≈ 0.1047) is routine for rotor-dynamic analysis and FEA.
Revolutions per minute are commonly used in motor specifications, rotating machinery, and mechanical design.
Understanding Degrees per second
The Degree per second (symbol: deg/s) is a unit of angular velocity. Angular velocity expressed in degrees rotated per second (1 deg/s = π/180 rad/s ≈ 0.01745 rad/s = 1/6 RPM). Deg/s is the standard reporting unit in aviation and aerospace for rotational rates: aircraft yaw / pitch / roll body-rate gyros per ARINC 429 inertial-reference unit data buses, missile guidance systems (typical airframe-rate limits 100-400 deg/s for fighter aircraft, up to 1,000 deg/s for short-range AAMs), satellite attitude-control system (ACS) reaction-wheel and CMG rates per AIAA standards, and the default unit on consumer-grade IMU (inertial measurement unit) datasheets and drone flight controllers (InvenSense MPU-6050, Bosch BMI160, ST LSM6DSL series). A standard 3-axis MEMS gyroscope chip typically measures up to ±2,000 deg/s full-scale (FSR) with programmable lower-range settings of ±250 / ±500 / ±1,000 deg/s for better noise floor at slower rates.
Degrees per second are commonly used in motor specifications, rotating machinery, and mechanical design.
Why Convert Revolutions per minute to Degrees per second?
Converting between Revolutions per minute and Degrees per second is a frequent requirement for engineers, scientists, and students working with angular velocity values. Different industries and regions favour different unit systems, so having a dependable conversion tool saves time and prevents errors in technical calculations. Whether you are verifying a specification sheet, cross-checking simulation results, or preparing a report for an international audience, accurate angular velocity conversion is essential.
Frequently Asked Questions
How do I convert Revolutions per minute to Degrees per second?
A rotational-speed unit counting complete 360° turns per minute (1 RPM = 2π/60 rad/s ≈ 0. To convert Revolutions per minute to Degrees per second, multiply by 6. For example, 25 RPM equals 150 deg/s.
How many Degrees per second are in 1 Revolutions per minute?
There are 6 Degrees per second in 1 Revolutions per minute.
How many Revolutions per minute are in 1 Degree per second?
There are 0.166667 Revolutions per minute in 1 Degree per second.
What is the formula for Revolutions per minute to Degree per second conversion?
The formula is: multiply by 6. This means 1 RPM = 6 deg/s.
Is a Revolutions per minute bigger than a Degree per second?
No. One Revolutions per minute is smaller than one Degree per second because 1 RPM equals 6 deg/s, which is greater than 1.
When do you need to convert between Revolutions per minute and Degrees per second?
Angular velocity expressed in degrees rotated per second (1 deg/s = π/180 rad/s ≈ 0. Revolutions per minute and Degree per second are both angular velocity units, so conversion comes up whenever one source of information uses one unit and another uses the other — a classic cross-reference challenge in engineering, trade, travel, and everyday life.